🔥 JEE Main 2027 Session 1 is in January — start the JEE Mains Physics Test Series →

CLASS 12 · MATHEMATICAL TOOLS

Complex Numbers & Phasors

Enrichment territory: beyond what any board exam, and most of JEE, strictly demands. But if you're heading into engineering or physics after Class 12, this is the single most useful piece of mathematics for the Alternating Current chapter, and for almost everything that comes after it. A phasor is just a spinning complex number, and Euler's formula is the hinge that makes the whole trick work.

01 · See it

Watch it happen

Both arrows spin at the same rate ω, always holding the angle between them fixed at the phase offset. Each arrow’s vertical component traces a sine wave on the right. Set the phase offset to 180° and watch the two traces mirror each other exactly, equal and opposite at every instant.

Each arrow is a phasor: a complex number of fixed length, spinning at a constant angular speed ω. Its vertical component (what you’d measure as the physical oscillating quantity, here drawn as the trace) is exactly a sine wave. Turn on the second phasor and set its phase offset, and you’re looking at two AC signals of the same frequency but different phase, the exact situation phasor addition is built for.

02 · Derive it

Where it comes from

Complex numbers as points in a plane. A complex number z=a+biz = a + bi is built from the rule i2=−1i^2 = -1, a number whose square is negative, which no real number can be. But you don’t need to think of ii as mysterious: just treat z=a+biz = a+bi as the point (a,b)(a, b) in a plane, with aa the horizontal (real) coordinate and bb the vertical (imaginary) coordinate. Like any point in a plane, it has a distance from the origin (the magnitude) and an angle from the positive real axis (the argument):

∣z∣=a2+b2,arg⁡(z)=θ=tan⁡−1 ⁣(ba)|z| = \sqrt{a^2+b^2}, \qquad \arg(z) = \theta = \tan^{-1}\!\left(\dfrac{b}{a}\right)

A brief bridge: exponentials and the Maclaurin series. Any sufficiently smooth function can be written as an infinite polynomial built from its derivatives at x=0x=0, called its Maclaurin series. For exe^x, cos⁡x\cos x, and sin⁡x\sin x, these series are:

ex=1+x+x22!+x33!+x44!+x55!+⋯e^x = 1 + x + \dfrac{x^2}{2!} + \dfrac{x^3}{3!} + \dfrac{x^4}{4!} + \dfrac{x^5}{5!} + \cdotscos⁡x=1−x22!+x44!−x66!+⋯\cos x = 1 - \dfrac{x^2}{2!} + \dfrac{x^4}{4!} - \dfrac{x^6}{6!} + \cdotssin⁡x=x−x33!+x55!−x77!+⋯\sin x = x - \dfrac{x^3}{3!} + \dfrac{x^5}{5!} - \dfrac{x^7}{7!} + \cdots

These aren’t facts to memorize in isolation here, just the raw material: notice cos⁡x\cos x uses only even powers of xx, and sin⁡x\sin x uses only odd powers. That split is exactly what makes the next step work.

Substitute x=iθx = i\theta into the exe^x series. Using i2=−1i^2=-1, so i3=−ii^3=-i, i4=1i^4=1, i5=ii^5=i, and the pattern repeats every four powers:

eiθ=1+iθ+(iθ)22!+(iθ)33!+(iθ)44!+(iθ)55!+⋯e^{i\theta} = 1 + i\theta + \dfrac{(i\theta)^2}{2!} + \dfrac{(i\theta)^3}{3!} + \dfrac{(i\theta)^4}{4!} + \dfrac{(i\theta)^5}{5!} + \cdots=1+iθ−θ22!−iθ33!+θ44!+iθ55!−⋯= 1 + i\theta - \dfrac{\theta^2}{2!} - i\dfrac{\theta^3}{3!} + \dfrac{\theta^4}{4!} + i\dfrac{\theta^5}{5!} - \cdots

Now sort these terms into two piles: the ones with no factor of ii, and the ones with exactly one factor of ii sitting out front:

eiθ=(1−θ22!+θ44!−⋯ )⏟this is exactly the cos⁡θ series+i(θ−θ33!+θ55!−⋯ )⏟this is exactly the sin⁡θ seriese^{i\theta} = \underbrace{\left(1 - \dfrac{\theta^2}{2!} + \dfrac{\theta^4}{4!} - \cdots\right)}_{\text{this is exactly the } \cos\theta \text{ series}} + i\underbrace{\left(\theta - \dfrac{\theta^3}{3!} + \dfrac{\theta^5}{5!} - \cdots\right)}_{\text{this is exactly the } \sin\theta \text{ series}}

The first pile, term for term, is the Maclaurin series for cos⁡θ\cos\theta written above. The second pile, term for term (after pulling the shared ii out front), is the Maclaurin series for sin⁡θ\sin\theta. Nothing is assumed here beyond the three series and the arithmetic of powers of ii, so this grouping is the entire proof:

Euler's formula
eiθ=cos⁡θ+isin⁡θe^{i\theta} = \cos\theta + i\sin\theta

Reading it as a phasor. A complex number of magnitude V0V_0 and argument θ\theta is V0eiθ=V0cos⁡θ+iV0sin⁡θV_0 e^{i\theta} = V_0\cos\theta + iV_0\sin\theta, a point at distance V0V_0 from the origin, at angle θ\theta. Let that angle grow with time, θ=ωt\theta = \omega t, and the point spins at constant angular speed ω\omega, tracing a circle. Its real part, V0cos⁡ωtV_0\cos\omega t, is a plain sinusoid: exactly the shape of an AC voltage or current. The imaginary part never corresponds to anything you’d measure with a meter; it exists purely so that multiplying by eiθe^{i\theta} (which rotates the point) can represent “shift the phase by θ\theta,” a single clean operation standing in for what would otherwise be a messy trigonometric identity.

03 · Break it

Where the shortcut stops working

The most common slip is treating the imaginary part as if it were itself some physical oscillating quantity, a second voltage or current running alongside the real one. It isn’t. Only the real part of the phasor (or, at the very end of a calculation, the magnitude and argument you extract from a sum of phasors) corresponds to anything a voltmeter or ammeter would read. The imaginary axis is scaffolding, not a second physical channel.

A second trap: assuming you can add phasors for signals of different frequencies the same way. Phasor addition works cleanly only because every phasor involved spins at the same ω\omega, so the angle between any two of them (their phase difference) never changes, and their sum is just another phasor spinning at that identical ω\omega. The moment the frequencies differ, the angle between the phasors keeps drifting, there is no single fixed phase difference to speak of, and you no longer get a clean rotating sum, you get beating, an entirely different phenomenon that this method doesn’t capture.

Finally, don’t confuse the magnitude of a phasor with its instantaneous value. V0V_0 is the peak (amplitude) of the oscillation, fixed in time; the instantaneous physical value V0cos⁡ωtV_0\cos\omega t constantly changes as the phasor spins. A phasor diagram frozen at one instant (as in the simulation above) shows the relationship between amplitudes and phases, not the voltage at every future moment, you still have to let it spin to see that.

04 · Master it

Apply it under exam conditions

Two AC voltage sources of the same frequency feed into a circuit: V1(t)=170sin⁡(ωt)V_1(t) = 170\sin(\omega t) V and V2(t)=130sin⁡(ωt+50∘)V_2(t) = 130\sin(\omega t + 50^\circ) V. Find the amplitude and phase of the resultant voltage V(t)=V1(t)+V2(t)V(t) = V_1(t) + V_2(t) using the phasor method.

Represent each voltage as a phasor (a complex number) at t=0t=0, with magnitude equal to the amplitude and argument equal to the phase:

V~1=170 ei(0∘)=170cos⁡0∘+i 170sin⁡0∘=170+i(0)\tilde{V}_1 = 170\,e^{i(0^\circ)} = 170\cos 0^\circ + i\,170\sin 0^\circ = 170 + i(0)V~2=130 ei(50∘)=130cos⁡50∘+i 130sin⁡50∘=83.6+i(99.6)\tilde{V}_2 = 130\,e^{i(50^\circ)} = 130\cos 50^\circ + i\,130\sin 50^\circ = 83.6 + i(99.6)

Add the phasors by adding real and imaginary parts separately:

V~=V~1+V~2=(170+83.6)+i(0+99.6)=253.6+i(99.6)\tilde{V} = \tilde{V}_1 + \tilde{V}_2 = (170 + 83.6) + i(0 + 99.6) = 253.6 + i(99.6)

Now convert back to magnitude and argument, which are exactly the amplitude and phase of the resultant sinusoid:

∣V~∣=253.62+99.62=64314+9920=74234≈272 V|\tilde{V}| = \sqrt{253.6^2 + 99.6^2} = \sqrt{64314 + 9920} = \sqrt{74234} \approx \textcolor{#e08a1e}{272\text{ V}}arg⁡(V~)=tan⁡−1 ⁣(99.6253.6)≈21.4∘\arg(\tilde{V}) = \tan^{-1}\!\left(\dfrac{99.6}{253.6}\right) \approx \textcolor{#e08a1e}{21.4^\circ}

So V(t)≈272sin⁡(ωt+21.4∘)V(t) \approx 272\sin(\omega t + 21.4^\circ) V. Notice the resultant amplitude (272 V) is neither the sum of the two amplitudes (300 V) nor their difference (40 V), it lands in between, exactly what you’d expect from two phasors added at an angle rather than lined up or opposed. And the resultant phase (21.4°) sits between 0° and 50°, pulled toward whichever source is larger, here closer to V1V_1 since 170>130170 > 130.

05 · FAQs

Quick answers

Why do we even need complex numbers for a physical, real-valued voltage?+

We don't, strictly, but the algebra of adding sinusoids with different phases is painful with sines and cosines directly (you need sum-to-product identities every time). Writing each sinusoid as the real part of a spinning complex number turns 'add two phase-shifted waves' into 'add two complex numbers,' which is just adding real parts and imaginary parts separately. The physical answer is always whatever you get by taking the real part at the end.

What do i and the imaginary axis actually mean physically?+

Nothing is physically oscillating along the imaginary axis. It's a bookkeeping axis that exists purely so rotation in the complex plane can encode 'phase so far' as an angle. Only the real part (the horizontal projection, in our convention) corresponds to an actual physical voltage or current at any instant.

How is Euler's formula actually proved, not just stated?+

Write out the Maclaurin series for e^x, cos x, and sin x separately, substitute x = iθ into the e^x series, group the terms by whether they carry a factor of i, and notice the i-free terms are exactly the cos θ series while the i-carrying terms are exactly i times the sin θ series. That grouping, with no extra assumption, is the whole proof.

Does phasor addition work if the two AC signals have different frequencies?+

No. The entire trick relies on both phasors spinning at the same angular speed ω, so the angle between them (the phase difference) stays fixed forever and the sum is just another phasor spinning at that same ω. Two different frequencies means the angle between the phasors keeps changing, so their sum is not a single clean rotating phasor at all, just a messier beating waveform.

What is the magnitude and argument of a complex number, geometrically?+

Plot the complex number a + bi as the point (a, b) in a plane. The magnitude is just its distance from the origin, √(a²+b²), by Pythagoras. The argument is the angle that line from the origin makes with the positive real axis. Euler's formula packages exactly this pair, magnitude and angle, into one exponential.